即时比分网

木屑顆粒機減速箱該怎么保養?

來源:http://comicbopk.com 發布時間:2019-06-20 瀏覽次數:
  木屑顆粒機減速箱該怎么保養?木屑顆粒機這個行業說起來可笑,減速機不是本人生產的,(個別廠家本人生產,但是做顆粒機的廠家做的減速機應該沒有做減速機做的吧?呵呵應該)電機不是本人生產的,軸承不是本人生產的,軸承室不是本人鑄造的,只是本人控制的機加工工差,那么剩余的就是裝配了,這樣說下來,做顆粒機的小廠家反而比大廠家的質量好,由于裝配質量才是真正權衡木屑顆粒機質量的關鍵,由于,電機、減速機、軸承等等一切的品牌相同的狀況下,大廠和小廠的質量差異在哪?再大的廠家技術總工不能去車間親身組裝吧?而小廠家反而親身盯著或者親身裝配,由于他們明白我買的價錢低,目的是市場占有率,市場占有率上來了,還必需用用戶的口碑去引見客戶,所以質量上做的愈加用心。
  How should the speed reducer of sawdust granulator be maintained? Sawdust granulator industry is ridiculous, the reducer is not my own production. (Individual manufacturers own production, but do granulator manufacturers do reducer should not be professional reducer do it? Ha ha should) The motor is not produced by myself, the bearing is not produced by myself, the bearing chamber is not cast by myself, but the poor machineries controlled by myself, then the rest is assembled. In this way, the quality of the small manufacturer specializing in granulating machine is better than that of the big manufacturer. Because the assembly quality is the key to truly weigh the quality of the sawdust granulating machine, because, the motor, the machine, the machine, the machine, the machine, the machine, the machine, the machine, Where are the quality differences between large and small factories under the same brand conditions of reducer, bearing and so on? No matter how big a manufacturer's general technicians can't go to the workshop to assemble themselves, can they? But the small manufacturer stares at or assembles in person, because they understand that the price I buy is low, the purpose is market share, market share has come up, but also need to use the user's word of mouth to introduce customers, so the quality of doing more attentively.
  木屑顆粒機批發
  Wholesale of sawdust granulator
  關于售前方面,既然小廠家電機,減速機,軸承等一切的配置都用行業高配置其目的是買的用戶的口碑,讓用戶引見用戶,那么就不會由于售后不及時這種軟性的問題而推倒了之前的一切努力。所以售后反而愈加用心。跑偏了,言歸正傳說說木屑顆粒機關鍵部件減速機的維護頤養。
  As for the pre-sale aspect, since all the configurations of small manufacturers'motors, reducers, bearings and so on all use the highest configurations in the industry, the purpose of which is to buy the user's reputation and let the user introduce the user, then all previous efforts will not be overwhelmed by the soft problem of not timely after-sales. Therefore, after-sale is more intentional. Running out of line, the legend says that the maintenance of the key components of the sawdust granulator reducer.
  一、每一臺木屑顆粒機在停止作業的時分都需求配置一臺減速機,這是其機械原理所決議的。但是在長期重負荷運用過程中,木屑顆粒機減速機難免會呈現一些毛病,面對這些毛病應該如何處置,濟南龍騰機械的木屑顆粒機高級工程師為您解答疑問。
  1. Each sawdust granulator needs to be equipped with a reducer when it stops working, which is determined by its mechanical principle. However, in the long-term heavy load operation process, sawdust granulator reducer inevitably presents some problems. In the face of these problems, how to deal with them, Jinan Longteng Machinery sawdust granulator senior engineer to answer your questions.
  木屑顆粒機批發
  Wholesale of sawdust granulator
  1、發現木屑顆粒機減速機油壓、油溫、流量不正常就需求對過濾器、油嘴停止清洗,清洗后再停止檢查光滑正常前方可運用。
  1. Discovering abnormal oil pressure, oil temperature and flow of sawdust granulator reducer, it is necessary to stop cleaning filters and nozzles, and then stop checking smoothness before it can be used.
  2、木屑顆粒機減速機的軸承要采用飛濺光滑,在拆洗重裝的時分需參加適量的鈣鈉基光滑脂,大約在軸承空間體積1/3。
  2. The bearings of sawdust granulator reducer should be spattered smooth, and proper amount of calcium-sodium base smooth grease should be taken into account when disassembling, washing and reassembling, which is about 1/3 of the bearing space volume.
  3、發現木屑顆粒機減速機通氣孔梗塞,應該拆下換氣體清洗過濾網后裝置運用。
  3. When the blockage of ventilation holes in sawdust granulator reducer is found, the device after changing gas to clean the filter screen should be removed and used.
  4、對齒面損傷面積沿齒長方向和齒高方向均超越20%時,應成對改換齒輪,改換后應跑合和負荷試車,齒長接觸達60%齒高達40%可正式運用。成對改換特意加粗,很重要,4很重要,不要換個件過幾天再換一個相同件。
  4. When the damage area of the tooth surface exceeds 20% along the tooth length direction and the tooth height direction, the gear should be replaced. After the replacement, the running-in and load test should be carried out. When the tooth length contact reaches 60%, the gear can be used formally up to 40%. Improvement is very important for the change of the special thickening, 4 is very important, do not change the same piece in a few days.
  5、在木屑顆粒機工作時,發現減速機油溫溫升超越80℃或油池溫度超越100℃及產生不正常的噪聲等現象時應中止運用,檢查緣由,改換光滑油掃除毛病后,方可繼續運轉。溫度很重要,記住這兩個,經常觸摸齒輪箱。早發現造維護。
  5. When the sawdust granulator is working, it is found that the oil temperature rise of the reducer exceeds 80 ~C or the oil pool temperature exceeds 100 ~C, and abnormal noise occurs, the operation should be discontinued. The reason should be checked and the smooth oil can be replaced to remove the defect before the operation can continue. Temperature is very important. Keep these two in mind and touch the gearbox frequently. Early detection, construction and maintenance.
木屑顆粒機批發
  6、木屑顆粒機減速機在轉動的時分輸出軸不轉了,有可能是減速機鍵銜接被毀壞,就要對減速機停止拆機檢查。
  6. When the speed reducer of sawdust granulator rotates, the output shaft does not turn. It may be that the key connection of the speed reducer is destroyed, so it is necessary to stop disassembling and inspecting the speed reducer.
  木屑顆粒機批發
  Wholesale of sawdust granulator
  二、木屑顆粒機減速機維護辦法
  2. Maintenance methods of sawdust granulator reducer
  1、光滑:光滑油減速機應經常檢查油標油位,光滑油引薦用18~22號雙曲線齒輪油,夏季用粘度大的油。次運轉500小時后將油排空,換新油。減速機應經常檢查油標油位,光滑油參加量以到達平安油位為準。
  1. Smoothness: Smooth oil reducer should check oil level regularly. Smooth oil is recommended to use hyperbolic gear oil No. 18-22 and high viscosity oil in summer. After the first operation for 500 hours, the oil will be emptied and replaced with new oil. The reducer should check the oil level regularly, and the amount of smooth oil should be based on reaching the safe oil level.
  2、齒輪減速箱的油面要經常檢查,如油面低于規則位置時添加光滑油,要勤加、加,嚴防多加,惹起漏油。齒輪箱機械油機械運轉500-1000小時應改換,其他應300小時改換。
  2. The oil surface of gear reducer should be checked frequently. If the oil surface is lower than the regular position, add smooth oil, add it frequently, and guard against excessive increase, causing oil leakage. The gear box oil machinery should be changed for 500-1000 hours, and the others should be changed for 300 hours.
  3、 經常檢查吊裝減速機的螺栓,不要呈現跑動,若有松動應及時鞏固。
  3. Check the bolts of hoisting reducer regularly, do not show running, if loose, consolidate in time.
  4、木屑顆粒機每班工作完,要肅清設備外表粉塵。
  4. After each shift of the sawdust granulator is finished, the dust on the surface of the equipment should be removed.
  5、每半年或一年對設備停止一次檢修,改換易損件。各設備檢修依據運轉狀況而定。
  5. Stop overhauling the equipment every six months or a year to replace the fragile parts. Maintenance of each equipment depends on its operation.
  6、電氣系統的顯現燈,空氣開關和行程開關等要經常檢查,若發現損壞要及時改換。
  6. The display lights, air switches and trip switches of the electrical system should be checked frequently. If damages are found, they should be replaced in time.
  龍騰機械之所以在行業競爭中生存,靠的不是轟天蓋地的宣傳,而是用心做好每臺設備,而是及時周到的售后效勞。我想這兩點足夠讓龍騰機械穩步前行。歡迎關注我們的網站http://comicbopk.com,提供木屑顆粒機批發。歡迎來電咨詢。
  The reason why Longteng Machinery survives in the industry competition lies not in the overwhelming propaganda, but in the timely and thoughtful after-sales service. I think these two points are enough for Longteng Machinery to move forward steadily. Welcome to our website http://comicbopk.com, which specializes in wholesale sawdust granulator. Welcome to inquire.

上一篇:秸稈顆粒機廠家為您剖析生物質顆粒機電流不穩定緣由

下一篇:生物質顆粒機生產廠家的壓輥為什么會出現磨損?

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩