即时比分网

木屑顆粒機批發廠家告訴您顆粒機不出顆粒的緣由!

來源:http://comicbopk.com 發布時間:2019-11-06 瀏覽次數:
  木屑顆粒機的主傳動采用高精度齒輪傳動,環形模具采用快卸式抱箍式,與相對的皮帶傳動式相比,效率明顯進步。但是有時運用木屑顆粒機時,只會產生粉末,而不會呈現顆粒緣由是什么? 以下木屑顆粒機批發小編將向您引見。
  The main drive of sawdust granulator adopts high-precision gear drive, and the ring mold adopts quick release hoop type. Compared with the relative belt drive type, the efficiency is improved obviously. But sometimes, when using the sawdust granulator, only the powder will be produced, but not the reason why the particles will not appear The following model granulator wholesale editor will introduce you.
  1.原料水分含量太低或太高
  1. The moisture content of raw materials is too low or too high
  假如水含量太高,則粉末不會太多,但是顆粒的硬度低于正常值,并且來自木屑顆粒機的顆粒容易松弛 假如原料中的水含量低,將難以構成粉末 過多 此時,應恰當控制原資料的水分含量。
木屑顆粒機批發
  If the water content is too high, the powder will not be too much, but the hardness of the particles is lower than the normal value, and the particles from the sawdust granulator are easy to relax. If the water content in the raw material is low, it will be difficult to form too much powder. At this time, the water content of the original data should be properly controlled.
  2.木屑顆粒機模具的磨損水平大
  2. The wear level of wood chip granulator mould is large
  由于木屑顆粒機模具的過度磨損,使網孔潤滑,招致嚴重的收縮,因而,與正常值相比,顆粒的壓力降低,這嚴重影響了顆粒的成型速度,并且招致粉末過多 這次您應該改換模具。
  Due to the excessive wear of the wood chip granulator die, the mesh lubrication and serious shrinkage are caused. Therefore, compared with the normal value, the pressure of the particles is reduced, which seriously affects the molding speed of the particles, and causes too much powder. This time you should change the die.
  3.木屑顆粒機機器老化
  3. Wood chip granulator machine aging
  木屑顆粒機的老化才能缺乏,并且電動機無法提供正常的轉速,從而招致壓力缺乏,無法壓成顆粒 此時,應改換木屑顆粒機的電動機。
  Only when the wood chip granulator is aged can it be lacked, and the motor cannot provide normal rotation speed, which leads to a lack of pressure and can't be pressed into particles, the motor of the wood chip granulator shall be replaced.
  木屑顆粒機的工作參數直接影響物料的運動特性,進而對設備的消費效率產生重要影響 因而,設備的工作參數在消費中應合理 為了進步設備的消費效率,通常對木屑顆粒機的壓輥和模具設計進行了改良,依據改良的壓輥和模具,提供了更好的工作參數,使模具和物料相匹配。使設備的生產效率更高。
  The working parameters of the chip granulator directly affect the movement characteristics of the materials, and then have an important impact on the consumption efficiency of the equipment. Therefore, the working parameters of the equipment should be reasonable in the consumption. In order to improve the consumption efficiency of the equipment, the design of the pressing roller and the mold of the chip granulator is usually improved. According to the improved pressing roller and the mold, the better working parameters are provided, so that the mold and the Materials match. Make the equipment more efficient.
  以上是木屑顆粒機批發廠家為大家介紹的顆粒機不出顆粒的緣由,想要了解更多內容,歡迎訪問網站:http://comicbopk.com
  The above is the reason why the granulator does not produce particles introduced by the wholesale manufacturer of sawdust granulator. For more information, please visit the website: http://comicbopk.com

上一篇:生物質顆粒機生產廠家對于空氣質量下降有什么作用?

下一篇:最后一頁

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩