即时比分网

木屑顆粒機的裝置和操作過程您了解嗎?

來源:http://comicbopk.com 發布時間:2019-07-04 瀏覽次數:
  木屑顆粒機是一套適用于注塑機側帶機械手的全自動設備。適用于PU、PVC、PC、ABS等軟硬材料的破碎回收。累計可粉碎的噴嘴物料量,自動粉碎,達到節能效果。機器在使用過程中,發生故障時,自動報警;可根據注塑機開模時間設定機器的工作和停機時間。電機裝有過載保護裝置。并具有電源聯鎖保護系統。安全可靠的運行清洗:可選用白色移動回收系統或粉體分離系統,充分避免人力物力的浪費,從而達到佳的回收效果。
  Sawdust granulator is a set of fully automatic equipment suitable for side-belt manipulator of injection moulding machine. It is suitable for crushing and recycling soft and hard materials such as PU, PVC, PC and ABS. Cumulative crushable nozzle material volume, automatic crushing, to achieve energy-saving effect. When the machine is in use, it will alarm automatically when it breaks down. The working and stopping time of the machine can be set according to the opening time of the injection machine. The motor is equipped with overload protection device. It also has power interlocking protection system. Safe and reliable operation cleaning: white mobile recovery system or powder separation system can be selected to fully avoid waste of manpower and material resources, so as to achieve the best recovery effect.
木屑顆粒機批發
  木屑顆粒機的裝置和操作過程您了解嗎?-木屑顆粒機批發:http://comicbopk.com
  Do you know the equipment and operation process of sawdust granulator? - Sawdust granulator wholesale: http://comicbopk.com
  木屑顆粒機的安裝
  Installation of sawdust granulator
  1. 將閥體安裝在機架上。安裝送料斗和送料斗。將電機、電機輪和機輪安裝在同一平面上,三角皮帶具有中等彈性。
  1. Install the valve body on the rack. Install hopper and hopper. The motor, the motor wheel and the machine wheel are mounted on the same plane, and the triangular belt has medium elasticity.
  2. 電路開關可靠,工作電壓穩定。這條線路接地良好。
  2. The circuit switch is reliable and the working voltage is stable. This line is well grounded.
  3.堅固的內旋板,旋圓齒和扁齒。主軸可靈活轉動,接通電源后,主軸與機器轉動方向一致(電機方向可根據接線調整)。機器只有在無異常聲音的情況下運行數分鐘后才能投入運行。
  3. Strong inner rotating plate, circular and flat teeth. The spindle can rotate flexibly. When the power supply is connected, the spindle and the machine rotate in the same direction (the motor direction can be adjusted according to the wiring). The machine can only run for several minutes without abnormal sound.
  4、自配功率應使磨機主軸轉速達到技術指標。
  4. Self-matching power should make the spindle speed of mill reach the technical target.
  二是木屑制粒機的操作規程
  Second, the operating rules of sawdust granulator
  1. 開機前,孟應檢查潤色寄存器是否有油。
  1. Before starting, Meng should check the lubrication register for oil.
  2. 清除物料中的金屬、砂、石等雜物,防止損壞機器
  2. Remove metal, sand, stone and other impurities from materials to prevent damage to machines.
  3.請勿將手放入進給料口。操作時不要打開開機蓋。
  3. Do not put your hand in the feed port. Do not open the boot cover during operation.
  4、網孔應選用適當,以免損壞鉚接。
  4. The mesh should be selected properly to avoid damaging riveting.
  5. 嚴禁在有載狀態下啟動機器。機器運轉一分鐘后,物料均勻進料。
  5. It is strictly forbidden to start the machine on load. After running for one minute, the material is fed evenly.
  6. 在停止前,閑置2分鐘以清除剩余的材料。
  6. Stay idle for 2 minutes before stopping to remove the remaining material.
  以上是木屑顆粒機批發廠家為大家整理的相關內容,想要了解更多內容,歡迎訪問網站:http://comicbopk.com
  The above is the relevant content of wholesale sawdust granulator manufacturers for you. For more information, please visit the website: http://comicbopk.com.

上一篇:生物質顆粒機是如何成型的,不理想的緣由是什么?

下一篇:秸稈顆粒粒機的利潤高于玉米,成為致富的新途徑

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩