即时比分网

木屑顆粒機批發的樺木鋸末壓縮比你知道嗎?

來源:http://comicbopk.com 發布時間:2019-06-21 瀏覽次數:
  木屑顆粒機壓縮比的不同決定了生物質顆粒的質量,甚至影響造粒機設備的產量,以下兩幅圖都是用樺木原料生產的生物質顆粒燃料,為什么會出現如此大的外觀差異呢?今天,龍騰的機械工程師將幫助你找到答案。
  The different compression ratio of wood chips granulator determines the quality of biomass particles and even affects the output of granulator equipment. The above two pictures are all biomass granular fuels produced from birch raw materials. Why are there such big differences in appearance? Today, Longteng mechanical engineers will help you find out the answer.
  提到生物質顆粒的生產,做這個行業的人都會知道一個同義詞:木屑顆粒機壓縮比。是的,以上兩種顆粒是在相同的材料、相同的水分、相同的設備下,更換不同壓縮比的磨具所產生的兩種不同效果的生產結果。
  When it comes to the production of biomass particles, people in this industry will know a synonym: compression ratio of sawdust granulator. Yes, the above two kinds of particles are produced by replacing abrasives with different compression ratios under the same material, the same moisture content and the same equipment.
  這里不得不說木屑顆粒機,壓縮比木頭顆粒機磨料壓縮比將根據原材料,比如我們常說:松木壓縮比例是1:6,松樹壓縮比是1:7,硬雜木壓縮比是1:5,破碎的刨花壓縮比是1:5。5、玉米秸稈的壓縮比為1:8,從這幾個簡單的數字來看,不同的原料壓縮比是不同的。例如,楊木的壓縮比為1:6。1和6分別代表什么?木屑顆粒機每一個磨具都是直接有一個小洞6毫米,8毫米,10毫米單位,這個1是直接代表每一個洞,如果環模的直徑8毫米,1代表了八個,6代表的有效孔徑,孔徑等于孔的直徑乘以有效孔徑長度,6 * 8 = 48歲即48。8:48簡化為1:6。因此,廠家只會告訴你磨具的壓縮比是1:6。我們廠家只會告訴你定制磨具的壓縮比是4.8出現了兩個相同壓縮比的版本。為了掌握磨具的實際壓縮比,許多用戶會自行測量磨具的壓縮比,但往往忽略鐘口的距離。龍騰工程師向您展示如何知道壓縮比的磨削工具。
木屑顆粒機批發
  It has to be said here that the abrasive compression ratio of wood particle machine will be based on raw materials, such as: the compression ratio of pine is 1:6, the compression ratio of pine is 1:7, the compression ratio of hard miscellaneous wood is 1:5, and the compression ratio of broken particles is 1:5. 5. The compression ratio of corn straw is 1:8. From these simple figures, the compression ratio of different raw materials is different. For example, the compression ratio of poplar wood is 1:6. What do 1 and 6 represent respectively? Every abrasive tool of sawdust granulator has a small hole of 6mm, 8mm, 10mm unit. This one represents each hole directly. If the diameter of annular die is 8mm, 1 represents eight, 6 represents effective aperture, the aperture is equal to the diameter of the hole multiplied by the effective aperture length, 6*8 = 48 years old, that is 48 years old. 8:48 is simplified to 1:6. Therefore, the manufacturer will only tell you that the compression ratio of abrasives is 1:6. Our manufacturer will only tell you that the compression ratio of customized abrasives is 4.8 and there are two versions with the same compression ratio. In order to grasp the actual compression ratio of abrasives, many users will measure the compression ratio of abrasives by themselves, but often ignore the distance of the bell mouth. The crown and shell engineer shows you how to know the grinding tool of compression ratio.
  喇叭口、成型孔和釋放孔構成了單元內磨削工具的厚度。因此,實際的磨料壓縮比為磨料厚度減去離出料孔的距離和喇叭口到孔徑的距離之比。因此流行的將造粒機的壓縮比實際上是指磨料的壓縮比,它是反映木屑顆粒擠壓強度的一個指標。壓縮比越大,顆粒越強。事實上,生物質顆粒并不是越強、越好,的顆粒密度在1.0左右,這樣的顆粒在外形上成型光滑美觀,燃燒時不會太硬而燃燒不足。
  Horn mouth, forming hole and release hole constitute the thickness of grinding tool in the unit. Therefore, the actual abrasive compression ratio is the ratio of the abrasive thickness minus the distance from the outlet hole and the distance from the bell mouth to the aperture. Therefore, the compression ratio of the prevailing granulator actually refers to the compression ratio of abrasives, which is an index reflecting the extrusion strength of sawdust particles. The bigger the compression ratio is, the stronger the particles are. In fact, biomass particles are not the stronger and the better. The best density of biomass particles is about 1.0. Such particles are smooth and beautiful in shape and will not burn too hard and insufficiently.
  此外,磨具的粗糙度也是衡量環模質量的一個重要指標。在相同壓縮比下,粗糙度值越大,鋸末顆粒的擠壓阻力越大,出料難度越大。過度的粗糙度也會影響顆粒表面的質量。合適的粗糙度值應該在0.8到1.6之間。另外,工程師提醒大家,由于植被生長周期和環境氣候的不同,不同地區的植被壓縮比略有不同。因此,要為您自己的產品找到合適的壓縮比,您需要使用您所使用的材料來證明實驗。
  In addition, the roughness of the abrasive tool is also an important index to measure the quality of the ring die. Under the same compression ratio, the greater the roughness value, the greater the extrusion resistance of sawdust particles, and the greater the discharge difficulty. Excessive roughness also affects the surface quality of particles. The appropriate roughness should be between 0.8 and 1.6. In addition, the engineer reminds you that vegetation compression ratio varies slightly in different areas due to the different vegetation growth cycle and environmental climate. Therefore, in order to find a suitable compression ratio for your own products, you need to use the materials you use to prove the experiment.
  以上是木屑顆粒機批發廠家為大家整理的相關內容,希望能幫到大家,我們的網站是http://comicbopk.com,歡迎大家關注。
  The above is the relevant content of wholesale manufacturer of sawdust granulator for you, hope to help you, our website is http://comicbopk.com, welcome your attention.

上一篇:秸稈顆粒機廠家讓世界沒有垃圾,只有錯位的資源

下一篇:生物質顆粒機生產廠家:顆粒機減速機傘齒為什么用不了幾天

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩