立即博

生物质颗粒机生产厂家在什么地方,木材粉碎机的工作原理

来源:http://www.comicbopk.com 发布时间:2019-10-30 浏览次数:
  木材粉碎机不只能粉碎树木绿化产生的绿色渣滓,还能粉碎软硬木材,刨花板,废旧沙发、家具、木柜等物料,粉碎出来的木屑能作为再生资料应用在多个范畴。例如能够在造纸厂用来制造再生纸;做成食用菊栽培的原料,用来种植香菇、木耳等食用菊;制造成机制木炭或生物燃料,用来替代传统煤炭燃料,这样能很好的起到维护环境的作用。
  Wood crusher can not only crush the green dregs produced by tree greening, but also crush the soft and hard wood, particleboard, waste sofa, furniture, wooden cabinet and other materials. The crushed wood chips can be used as regeneration materials in many fields. For example, it can be used to make recycled paper in paper mills; it can be used to make raw materials for cultivation of edible chrysanthemum, such as mushroom, agaric, etc.; it can be made into machine-made charcoal or biofuel, which can be used to replace traditional coal fuel, so it can play a good role in maintaining the environment.
生物质颗粒机生产厂家
  那么,生物质颗粒机生产厂家在什么地方,木材粉碎机的工作原理是什么呢?
  So, where is the biomass granulator manufacturer and what is the working principle of the wood crusher?
  一,要理解大型木材粉碎机的工作原理,就要先理解该机的组成:由机体、中机体、下机体三大局部组成,粉碎刀具有7型刀、一型刀和离心刀组成,付机由风机、集粉器、除尘器组成;
  First, to understand the working principle of the large-scale wood crusher, we must first understand the composition of the machine: it is composed of three parts: the body, the middle body and the lower body. The grinding knife is composed of 7-type knife, 1-type knife and centrifugal knife, and the auxiliary machine is composed of fan, powder collector and dust remover.
  其次,在理解了大型木材粉碎机的构造组成以后,我们下面就来引见一下其工作的过程:
  Secondly, after understanding the structural composition of the large-scale wood crusher, we will introduce its working process as follows:
  主机粉碎室采用7型刀、一型刀和离心刀,有粗粉碎、细粉碎和离心来复粉碎,由电机带动粉碎机转子高速运转,使机械产生高速气流对粉碎物料产生高强度的撞击力、紧缩力、切割力、摩擦力,来到达共同的粉碎功用,在三种刀片切割粉碎过程中,转子产生高速度气流随刀片方向旋转,物料在气流中加速并重复冲击、切割摩擦,同时遭到三种粉碎作用,被粉碎的物料随气流进入剖析器停止剖析,由于在遭到剖析器转子向心力作用时又遭到气流向心力的作用,所以当向心力大于向心力时,细粒子随气流进入集粉器搜集,粗粒子进入离心来复粉碎室继续粉碎直至到达您所称心的细度。
  The grinding chamber of the main machine adopts 7-type knife, 1-type knife and centrifugal knife, including coarse grinding, fine grinding and centrifugal re grinding. The motor drives the rotor of the crusher to run at high speed, so that the high-speed air flow generated by the machine produces high-strength impact force, tightening force, cutting force and friction force on the crushed materials, so as to achieve the common grinding function. In the cutting and grinding process of three kinds of blades, the rotor produces high speed. When the air flow rotates in the direction of the blade, the material accelerates in the air flow and repeatedly impacts, cuts and rubs. At the same time, it is subjected to three kinds of crushing effects. The crushed material enters the analyzer with the air flow to stop the analysis. Because the centripetal force of the air flow is applied when the centripetal force is greater than the centripetal force, the fine particles enter the powder collector with the air flow to collect, and the coarse particles enter the powder collector with the air flow. After centrifugation, the grinding chamber will continue to crush until it reaches the desired fineness.
  以上是生物质颗粒机生产厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:http://www.comicbopk.com
  The above is the relevant content introduced by the biomass granulator manufacturer. To learn more, please visit the website: http://www.comicbopk.com

上一篇:玉米秸秆颗粒机厂家产生的秸秆颗粒能否作为火电燃料?

下一篇:秸秆颗粒机厂家帮助解决“垃圾围城”困境

广东11选5 广东11选5 广东11选5走势图 广东11选5走势图 广东11选5开奖记录 广东11选5 广东11选5走势图 麒麟棋牌游戏中心APP下载 广东11选5走势图 广东11选5