即时比分网

生物質顆粒機生產廠家濟南各產品型號綜合對比!

來源:http://comicbopk.com 發布時間:2019-10-25 瀏覽次數:
  各品種型生物質顆粒機的綜合比照:哪種顆粒機好用各品種型生物質顆粒機的綜合比照:哪種顆粒機好用目前市場上常見的生物質顆粒機有以下幾種:環模顆粒機,平模顆粒機,沖壓式顆粒機,立式環模顆粒機等。
  Comprehensive comparison of various types of biomass granulators: which type of granulator is good for use: which type of granulator is good for use. There are several kinds of common biomass granulators on the market at present: ring mold granulator, flat mold granulator, stamping granulator, vertical ring mold granulator, etc.
  大家在選擇顆粒機時,常常不曉得如何選擇,也不懂的什么構造的顆粒機合適,終究要選擇用哪一種設備來制造生物質燃料顆粒呢?我們來剖析一下各種顆粒機在他們制造燃料中的優缺陷:
  When we choose the granulator, we often don't know how to choose, what structure of granulator is suitable, and which equipment should be used to make biomass fuel particles after all? Let's analyze the advantages and disadvantages of various particle machines in their fuel production:
  平模制粒機 缺陷:
  Defects of flat die granulator:
  1.平行壓輪兩端不同步,形成無功磨損,錐形壓輪本錢高。
  1. The two ends of the parallel roller are not synchronized, resulting in reactive wear and high cost of the conical roller.
  2.因模板支點在,周圍受壓,容易變形斷裂。
  2. Because the formwork fulcrum is in the center and the surrounding is compressed, it is easy to deform and fracture.
  3.壓輪總成靜止,物料比重輕,活動性差容易堆積起拱。
生物質顆粒機生產廠家
  3. The roller assembly is stationary, the material proportion is light, and the poor activity is easy to pile up and arch.
  4.模板旋轉物料產生向心力,形成物料不平均堆積現象,招致設備悶車。
  4. The centripetal force generated by the rotating materials of the formwork results in the uneven accumulation of materials, which causes the equipment to be blocked.
  5.模板轉速越高,物料向心力越大,所以平模制粒機必需低速運轉,產量就會收到影響。
  5. The higher the rotating speed of the template, the greater the centripetal force of the material, so the flat mold granulator must run at a low speed, and the output will be affected.
  環模制粒機 缺陷:
  Defects of ring mold granulator:
  1.90度進料方式,比重較輕,活動性差的物料進料艱難,易堆積。
  1. 90 degree feeding mode, light proportion, poor activity of materials feeding difficult, easy to pile up.
  2.比重輕的,活動性差的物料進入制粒室里面不易產生向心力,散布不平均。
  2. Materials with light specific gravity and poor mobility are not easy to produce centripetal force and uneven distribution when entering the pelletizing chamber.
  3.模具旋轉使物料離心散布,但壓輪靜止,容易障礙物料散布,不合適比重輕活動性差的能源行業制粒。
  3. The material is centrifugally dispersed due to the rotation of the die, but the pressure wheel is still, which is easy to hinder the material dispersion, so it is not suitable for the energy industry with low specific gravity and poor mobility to make particles.
  4.設備密封水平高,不易于散熱,粗纖維造粒制粒室容易產生高溫,使壓輪油脂溢出,短時間形成損壞。
  4. The equipment has a high sealing level and is not easy to dissipate heat. High temperature is easy to be generated in the pelletizing chamber of crude fiber, which causes grease overflow and damage in a short time.
  立式環模木屑顆粒機 優點:
  Advantages of vertical ring mold sawdust granulator:
  立式環模顆粒機
  Vertical ring mold granulator
  1.模具立向,垂直進料,不起拱,并備有風冷系統,易散熱。
  1. The mold is vertical, vertical feeding, no arching, and equipped with air cooling system, easy to heat.
  2.模具靜止,壓輪旋轉,物料離心,均布周邊。 3.模具兩層,雙用均可,高產節能。
  2. The mold is still, the pressure wheel rotates, the material is centrifuged, and the periphery is evenly distributed. 3. The mold has two layers, both of which can be used for high production and energy saving.
  4.光滑獨立,高壓過濾,清潔暢通。
  4. Smooth and independent, high pressure filtration, clean and smooth.
  5.獨立的出料安裝,保證制粒的成型率。
  5. Independent discharging and installation to ensure the molding rate of granulation.
  立式環模顆粒機合適壓制難粘合、成型難的物料,如:鋸末、木屑、稻殼、葵花籽殼、花生殼等各瓜果殼;樹枝樹干樹皮等各種木料下腳料;各種農作物秸稈;灰渣等各種化工原料。
  The vertical ring mold granulator is suitable for pressing materials that are difficult to be bonded and shaped, such as sawdust, sawdust, rice husk, sunflower seed husk, peanut husk and other melon and fruit husks; all kinds of wood scraps such as branch, trunk and bark; all kinds of crop straw; ash and other chemical raw materials.
  應用于生物質燃料廠、發電廠、木材廠、家具廠、肥料廠、化工廠等,是投資小,奏效快,無風險、更理想的緊縮致密成型設備。
  It is applied in biomass fuel plant, power plant, wood plant, furniture plant, fertilizer plant, chemical plant, etc. it is the most ideal compact compact molding equipment with small investment, quick effect, no risk.
  以上是生物質顆粒機生產廠家為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站:http://comicbopk.comThe above is the relevant content introduced by the biomass granulator manufacturer. To learn more, please visit the website: http://comicbopk.com

上一篇:秸稈顆粒機廠家直銷:在綠色環保上開辟了一條新道路!

下一篇:木屑顆粒機批發在東北為什么那么受歡迎?

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩