即时比分网

木屑顆粒機批發環模的寄存地點有什么要求?

來源:http://comicbopk.com 發布時間:2019-10-14 瀏覽次數:
  木屑顆粒機的環模是木屑顆粒機的主要部件之一,在生物質鋸末顆粒機制粒工藝中,起著關鍵性作用,因而環模的寄存問題也要惹起注重。
  The ring mold of sawdust granulator is one of the main components of sawdust granulator. It plays a key role in the process of sawdust granulator. Therefore, the problem of the storage of the ring mold should also be paid attention to.
  那么環模應該怎樣寄存呢?
  So how should the ring module be stored?
  木屑顆粒機環模的寄存地點有什么請求
  What is the request for the storage location of the ring mould of the sawdust granulator?
  首先。環模要經常放在枯燥、清潔、通風的中央。
  First. Ring dies should always be placed in a dry, clean and ventilated center.
  其次,假如長時間不用能夠在外表上涂上一層廢機油,從而阻止空氣中水分的腐蝕。
  Secondly, if you do not need to be able to coat a layer of waste oil on the surface for a long time, so as to prevent the corrosion of moisture in the air.
  還有就是,普通在生產車間都會有很多的生產原料,切忌環模不要放在這些中央,由于物料特別容易吸收水分而且不易散去,假如和環模放在一同的話,會加快環模的腐蝕,從而影響其運用壽命。
  Also, there are a lot of raw materials in the production workshop. Don't put the ring die in these centers. Because the material is easy to absorb moisture and not easy to disperse, if it is put together with the ring die, it will accelerate the corrosion of the ring die, thus affecting its service life.
  所以,假如在生產過程中需求把環模卸下來做備用,應當在停機前用油性物料把生產原料全部擠壓出,以保證下次運用的時分模孔都能出料,假如不用油性物料填充的話,長時間的寄存不只會形成環模的腐蝕,由于生產原料含有一定量的水分,在模孔中會加快腐蝕,形成模孔粗糙,影響出料。
木屑顆粒機批發
  Therefore, if it is necessary to unload the ring die for reserve in the production process, all the raw materials should be extruded with oily materials before shutdown, so as to ensure that the parting holes can be discharged at the next time of application. If not filled with oily materials, long-term storage will not only cause the corrosion of the ring die, because the raw materials contain a certain amount of water, the corrosion will be accelerated in the die holes. Formation of rough die hole, affecting the discharge.
  有時分以至會形成生物質鋸末顆粒機環模的報廢,加重損失,所以環模的運用和保管都非常的重要。
  Sometimes even the annular die of biomass sawdust granulator will be scrapped, which will aggravate the loss, so the application and maintenance of the annular die are very important.
  木屑顆粒機環模貯存六個月以后,里面的油質填充物必需改換成新的,由于貯存過長的時間里面的物料會變硬,再次運用時生物質鋸末顆粒機壓制不出來,從而形成堵機。
  After six months of storage, the oil filler in the sawdust granulator must be replaced by a new one. Because the material in the sawdust granulator will harden after a long time of storage, the biomass sawdust granulator will not be pressed when it is used again, thus forming a blockage.
  關于木屑顆粒機環模的寄存問題今天就先引見到這里。
  The storage of the ring die of the sawdust granulator is introduced here today.
  濟南龍騰新能源重型設備有限公司生產秸稈顆粒機,玉米秸稈顆粒機,秸稈壓塊機,木屑顆粒機,秸稈煤炭成型機,飼料顆粒機等系列設備歡送您的咨詢。以上是木屑顆粒機批發廠家為大家介紹的相關內容,本文來源:http://comicbopk.comJinan Longteng New Energy Heavy Equipment Co., Ltd. specializes in the production of straw granulator, corn straw granulator, straw compactor, sawdust granulator, straw coal briquetting machine, feed granulator and other equipment to welcome your consultation. Above is the related content introduced by wholesale manufacturer of sawdust granulator. This article is from http://comicbopk.com.
 

上一篇:生物質顆粒機生產廠家濟南登記需求材料有哪些?

下一篇:秸稈顆粒機廠家構成可再生能源開展必需遵照環境條件!

重庆彩票 重庆彩票 重庆彩票 上海时时乐 上海时时乐 专业玩彩 专业玩彩 专业玩彩