立即博

生物质颗粒机生产厂家成型机温度多少适宜?

来源:http://www.comicbopk.com 发布时间:2019-09-23 浏览次数:
  成品燃料所散发的热量主要是通过自然挥发燃烧的形式。龙腾小编今天为您简要介绍一下生物质燃料成型机。
  The heat emitted by the finished fuel is mainly in the form of natural volatilization combustion. Longteng Xiaobian gives you a brief introduction of biomass fuel briquetting machine today.
  生物质燃料成型机成品碳燃烧份额很小,燃料要实现充分挥发最好在氧气充足的情况下,同时应具有氧气能够充分搅拌的条件。生物质燃料成型机产品在燃烧时容易结焦,龙腾生物质燃料燃烧时容易结焦,我公司采用先进的二次空气燃烧,为燃料的高效燃烧和燃尽底部打下了良好的基础。本公司生产的生物质燃料成型机克服了传统冬季燃料适应性范围小、燃烧程度低、黑烟滚滚等缺点。
  Carbon burning share of biomass fuel briquetting machine is very small. Fuel volatilization is best achieved when oxygen is sufficient, and oxygen can be fully stirred at the same time. The products of biomass fuel briquetting machine are easy to coke when burning, and Xinyang brand biomass fuel is easy to coke when burning. Our company adopts advanced secondary air combustion, which lays a good foundation for efficient combustion of fuel and burnout bottom. The biomass fuel briquetting machine manufactured by our company overcomes the shortcomings of traditional winter fuel, such as small adaptability range, low burning degree and black smoke rolling.
生物质颗粒机生产厂家
  生物质燃料的燃烧通常分为四个步骤:
  The combustion of biomass fuels is usually divided into four steps:
  1. 第一阶段温度为20-200℃,失重约10%,主要是对生物质原料进行脱水。
  1. In the first stage, the temperature is 20-200 C and the weight loss is about 10%. The dehydration of biomass raw materials is the main process.
  2. 在第二阶段,温度在200-500℃之间,减重85%以上。这一阶段是生物质挥发分和碳的燃烧过程,分别集中在350℃和485℃。
  2. In the second stage, the temperature ranges from 200 to 500 degrees Celsius and the weight loss is more than 85%. This stage is the combustion process of volatile matter and carbon, which concentrates at 350 C and 485 C, respectively.
  3.在第三阶段,温度在500℃到820℃之间,材料的化学成本基本保持不变。相同的化学成分可以有不同的晶体类型,低焓的晶体在一定范围内是最稳定的。随着温度的变化,晶体从一种形式变成另一种形式。
  3. In the third stage, the chemical cost of the material remained basically unchanged between 500 and 820 C. The same chemical composition can have different crystal types, and the crystals with low enthalpy are the most stable in a certain range. With the change of temperature, crystals change from one form to another.
  4. 最终温度为850-1300℃,为生物质完全熔融阶段。
  4. The final temperature is 850-1300 C, which is the complete melting stage of biomass.
  通过以上的了解,我想很多用户对生物质燃料成型机有了新的概念,欢迎全国各地的用户随时参观本公司购买设备!
  Through the above understanding, I think many users have a new concept of biomass fuel briquetting machine. Welcome users from all over the country to visit our company to buy equipment at any time!
  以上是对“生物质颗粒机生产厂家成型机温度多少适宜?”的相关介绍,想要了解更多内容,欢迎访问网站:http://www.comicbopk.comThe above is an introduction to "how suitable is the molding machine temperature for biomass granulator manufacturer?" for more information, please visit the website: http://www.comicbopk.com

上一篇:木屑颗粒机呈现的各种状况都代表了什么

下一篇:最后一页

大圣棋牌APP下载 广东11选5走势图 广东11选5走势图 广东11选5走势图 麒麟棋牌 大圣棋牌官方版下载 大圣棋牌官方版下载 立即博 广东11选5开奖结果 大圣棋牌